Originally Posted by Ilma
That seems unusual to be running out of fuel and maxing trims at only 14 psi of boost.
You should log fuel trims for bank 2 as well as bank 1 to see if they are both maxing out.
This will help rule out a faulty injector in bank 1 causing this issue.
You can also try increasing the cell values for open loop fueling in the user adjustable table.
Here is what I changed mine too:
when I run your map,I got 10738 and 10722 codes,its looke like a hpfp,but my hpfp is the new pump,the parts codes is 13517616170,