View Single Post
      01-30-2013, 09:27 PM   #8
BOBKUR
Major
13
Rep
1,350
Posts

 
Drives: 2008 E 90
Join Date: Mar 2012
Location: CALIFORNIA

iTrader: (2)

Quote:
Originally Posted by g9sBMW View Post
I purchased the harness from distantxtremes which comes with no instructions except the following i got from email

HARNESS = VEHICLE
Red Wire with Fuse Holder = Red Wire/White Stripe (POWER)
Red Wire with Insulated Male Spade Terminal = Yellow Wire/Blue Stripe (LOW BEAM WIRE)
White Wire with Insulated Male Spade Terminal = Black Wire/Green Stripe or Blue Wire/Green Stripe (PASSENGER SIDE HALO WIRE)
Black Wire with Ring Terminal = Metal Ground Stud on PASSENGER SIDE (GROUND)
Black Wire with Insulated Male Spade Terminal = Black Wire/Green Stripe or Blue Wire/Green Stripe (DRIVER SIDE HALO WIRE)

So I followed this PDF (http://www.namotorsports.net/docs/VIE90DRLHarness.pdf)

I've got everything hooked up and now when I put the key fob in and press start. . . none of the halos turn on. But my passenger side headlight is on
(with light switch in the off position)

If I press the lock and unlock button, the passenger side headlight blinks with the beeps.
On my car I had 2 black/green wires at the headlights and the one you want to hook to is in position #1 which is the smaller gauge black/green.