View Single Post
      02-03-2013, 03:38 AM   #16
w2830
Private
0

 
Drives: 2008 E92 335I
Join Date: Dec 2012
Location: Canada


Posts: 66
iTrader: (0)

Quote:
Originally Posted by e90drvr View Post
I did a comparison of the CAS settings before and after I changed my central unlock setting from 'All Doors' to 'Driver's Side Only' and the following was the only change:
Code:
SL_ZV_SENDER_1
    nicht_aktiv --> All Doors
    aktiv  -->  Driver's Side Only
I have iDrive so I changed this using the system menus but if you're looking to at least get your preferred functionality back, that setting should do it.
Why it's not in your KOMBI is a different matter, I think.

Hope that helps.

EDIT:
And a quick after thought as I was looking through my KOMBI module:
ZV most likely stands for Zentralverriegelung (Central Locking) as such the following settings might be useful:
Code:
ZV_VER_AUS
ZV_VER_FAHRT
ZV_VER_FAHRT_ZEIT
Mine are all set to 'aktiv' but then again I don't have the settings in my KOMBI because I have them in the iDrive.
I can't find this line"SL_ZV_SENDER_1"in mine. maybe there's difference between cars with idrive and non idrives.
and the closest came up are below:
SEL_ZV_SENDER_1
aktiv
SEL_ZV_SENDER_2
aktiv
SEL_ZV_SENDER_3
aktiv
SEL_ZV_SENDER_4
aktiv
any idea what the "SEL" in the front means before i go try turning all of them into "nicht_aktiv"?

I do have those lines akitv tho like yours:
ZV_VER_AUS
ZV_VER_FAHRT
ZV_VER_FAHRT_ZEIT[/code]

Anyway,I really appreciate you taking your time out doing what you did for me!!
now,i hope someone could post up a trc from their non idrive e92(mine is 08),so i can do a comparition.