Originally Posted by Otherbloke
Guys thanks for the great thread, am nearly there with my retrofit.
Microphones I see on the thread have 2 wires, but there are 3 connections on my Mic? Could anyone advise which number pins on the mic go to which pins on my new professional HU?
People have been using two out of laziness since a shield is not absolutely necessary for function. Looking at the pins point-on, from left to right, they're mic+, mic- and shield. I strongly recommend you use shielded wire, though soldering the shield to pin3 isn't especially critical (attaching it on the MULF side is).