BMW 3-Series (E90 E92) Forum - View Single Post

Juiced46 · 02-08-2013, 12:16 PM

The scope service is not a scan on the car, the tester never gets hooked to the car during a "scope" service.

Also on the N55 with a Procede on the car and it is scanned, it still will not scan the car or detect the car in the system even on MAP 0. The 2 CAN wires must be disconnected for the BMW system to ID the car. The rest of the wiring can stay, just the 2 DME wires from the Procede have to be disconnected. TRUST me on this.

They never scanned your car. I can assure you

Also for your Anti trap issue. There is a very very specific bulletin on how to fix that issue. It is NOT a window adjustment, do not let them touch your windows, its going going to fix the problem and they will probably make it worse and at worst case introduce water leaks

02-08-2013, 12:16 PM	#5
Juiced46 Captain Drives: 03 Turbo Cobra, 2011 335xi Join Date: Jun 2010 Location: Wallingford CT Posts: 972 iTrader: (3)	The scope service is not a scan on the car, the tester never gets hooked to the car during a "scope" service. Also on the N55 with a Procede on the car and it is scanned, it still will not scan the car or detect the car in the system even on MAP 0. The 2 CAN wires must be disconnected for the BMW system to ID the car. The rest of the wiring can stay, just the 2 DME wires from the Procede have to be disconnected. TRUST me on this. They never scanned your car. I can assure you Also for your Anti trap issue. There is a very very specific bulletin on how to fix that issue. It is NOT a window adjustment, do not let them touch your windows, its going going to fix the problem and they will probably make it worse and at worst case introduce water leaks __________________ 2013 Alpine White F10 535i. JB4 S2, Quad Tip Magnaflow Exhaust, H&R Springs 2011 335ix Le Mans Blue w/ M Sport SOLD 2003 Turbo Cobra 765rwhp/650rwtq 9.77@126 pump gas, lifting @ the 1000ft mark Last edited by Juiced46; 02-08-2013 at 12:21 PM.