View Single Post
      02-20-2013, 04:55 PM   #2
Second Lieutenant
hoonywise's Avatar

Drives: 2008 e90 335xi BSM
Join Date: Jul 2012
Location: South Bay

iTrader: (5)

Garage List
2008 BMW 335xi  [5.00]
Originally Posted by e90335iftw View Post
Im trying to install my blacklines but the damn plugs won't come out.
i've broken 2 so far, and gotten 1 successfully out. (the plugs on the top of the inside of the trunk)
Is there a trick im missing? all the diy guides say that you can simply take them out with a screw driver and then popping them out with your hands. but it just won't work damn it...
I used nylon prying tools when I installed mine. When pulling them out, I used two tools to pry on each side and pull it it out using both tools while holding on the plug with my thumbs (so that I don't get in the face when plug pops out).

Good luck.

335xi Stock | BMW PE | Alufelgen CS7 | KW V1 | OEM Mtech Kit | OEM Euro Xenon | OEM Blacklines | P3 Gauge v2