Originally Posted by DallasBoosted
Most shops don't really reply to emails. Take the lines off and see where the leak is and what caused it (rubbing? defective line?) and if its something they need to address with a defective line replacement etc, then call them and take it up with them.
I called the wrong location, I got a hold of chad at the New Mexico location and he is the man. They are just in the process of merging the 2 stores.
Stett is making me fully stainless lines with red and blue fittings and since I brought this to his attention this will be available for the N54. He also told me to take the fitting apart, cut those hose and reassemble and the leak will be gone more than likely.
Chad is a stand up guy, my fault
for doubting them....I fully admit that.
JB4 G5, WEDGE flash, Walbro 455 LPFP, HFS-4 meth kit 4-AN SS lines, BMS OCC, RB turbos W/3.5 N20 sensor, RB valve, BMS DCI, 3" AR Dps, Custom OC W/ SS lines, ER FMIC, ER CP W/HKS BOV, M3 control arms W/upgraded bushings, M3 Strut Brace, M3 front sway, Meyle HD tie-rods, HPA rear toe arms, Wavetrac LSD, DEFIV kit, Ohlins R/T Cois W/12KG swift springs, Power-Flex subframe bushings, stoptech rotors, Rogue Tranny Mounts, Morr VS8.2 rims 245/295