I've always had to plug these holes.. ok no laughing guys..works 100%
(and I'm OCD )
Dave's NO SANDING fix !
Ok first get a tube of caulking--(small 1.69 tube, not one with a caulking gun-- (usually white- non silicone) If you have a white car- you can stop here =)
second: add touch up paint - with brush
* the caulking normally shrinks.. and leaves a dimple- which kind looks like a factory- drill here small impression if you needed to add the tag back. (you could always add more caulk if you hate the dimple-
* for the holes that have pulled out impressions from a screw- use a good exacto and trim before applying (caulk then tu paint)