View Single Post
      03-24-2013, 08:03 AM   #8
NSFW 335i
Lieutenant
NSFW 335i's Avatar
15
Rep
559
Posts

 
Drives: 08 e92 335i
Join Date: Oct 2009
Location: ny

iTrader: (7)

Quote:
Originally Posted by robc1976
Quote:
Originally Posted by Game View Post
Pretty sure my coilovers are the same way (KW V1). They're not even at all when it comes to actual threads on the coilovers, but even on the wheel gap. I really don't know what the problem is.
Just adjusted mine, keep in mind you have to screw in the strut in the rear in and out (lower/heighten) however you need to so the adjuster is slightly loose when on jack stands.
I took the whole rear out, adjusted it to three threads on on each side then bolted everything in. The height on each side is significantly different, about 1/2 inch lower on the passenger side. Idk which side is messed up. The lower side or higher. The driver side at three turns from the top has a finger gap. The other sider tAkes 11 turns
__________________
08 E92 335i AW Coral Red 6MT Fully Loaded|AA DP|BMS DCI|JB4 G5|Milltek full exhaust|SSK|Stett CP|Tial bov|Tinted window|HID Fogs|M3 Front|Mtech Rear|VMR V710|ACS pedals|V1 hardwired|BMW Performance Parts-Shift knob-Boot-E-Brake-SteeringWheel|CF Parts CSL trunk-V35 Hood-ACS roofspoiler|Red Pre-LCIs|Tow hook Plate|Clutch Stop|
<img src=http://i1221.photobucket.com/albums/dd468/dkhan22/no.jpg border=0 alt= />