View Single Post
      04-15-2013, 03:25 PM   #7
2006 330i, TSM, Black, manual, sport
TSM330i's Avatar

Drives: 2015 GTI, E86 Z4 3.0si Racecar
Join Date: Nov 2005
Location: Chester Springs, PA

iTrader: (2)

Originally Posted by Splinterz88 View Post
Hope to see you on the 27th. Any chance of a bimmerworks enduro race car build thread? and/or possible 4 hour enduro at the Del Val NJMP Event in late August?
Steve has been documenting the build, so it'll be more of a here's the step by step build, but when it's completed.
We're going to be running a full Z4M suspension with TC Kline coil-overs since we couldn't get a replacement strut from KW for the competition set-up we had. The differential is a Diffsonline MZ4 LSD with 3.91 gears. We purchased a Supersprint header and will do a custom exhaust with race mufflers only. We will end up using the Stoptechs we have as well.
In the end, the race weight needs to be 3,050lbs with driver, so since I'm the lightest driver, the car will have to weigh about 2,870lbs. Hopefully we'll be very close to that.

Yes, our goal is to run the BMWCCA Endurance Series, so the next race will be Mid-Ohio on May 24, then on August 23 NJMP and September 20 at Watkins Glen. There is talk about another race at Sebring, but nothing is finalized yet.
2015 GTI S, 6M, LP, Volk TE37SL 17x8.5, Michelin PSS 245/40, HPA SHS Coil-Overs, Peloquin LSD, Sachs SRE, Eurocode F/R Sway Bars, SuperPro Control Arms, Remus Catback, APR Stage 1 Tune, APR CAI, Aero Force Gauge Pod, APR Boost Gauge, Kersher Front Lip, Short Shifter, Tyrolsport Deadset, Stoptech BBK, HPA Dogbone
2008 BMW Z4 3.0si Coupe - because racecar