View Single Post
      05-06-2013, 12:43 PM   #3
KevinDonut
why they call me ninja turtle?!
 
Drives: 08' 335i Stick Sedan
Join Date: Jun 2010
Location: SoCal

Posts: 83
iTrader: (1)

Quote:
Originally Posted by PINeely View Post
I've done a few. They're pretty easy to get on and off and the parts are cheap, totally DIY-able. Remember to get an alignment afterwards.

Here is ECSTuning's selection of tie rods. They range from 110 for an OEM to 25 for an aftermarket. I suggest going with Lemforder if you are going to replace only this one, or if you want to spend a bit extra the Meyle rods are an improvement over OEM (bigger bushings, tighter steering) but you'll need both sides.

http://www.ecstuning.com/BMW-E90-335...earch/Tie_Rod/
Much appreciated for the info PINeely!

Of course my evil side told me to replace both sides with HD ones...but it may not fly when i tell my wife...so i guess i may go with Lemforder for the bent side this time.

Again, thx for the input.
KevinDonut is offline   Taiwan
0
Reply With Quote