Originally Posted by cesanche
This may sound like a silly question, but since I'm only going to replace the thermostat, should i only complete the steps up to removing the thermostat and then skip the pump replacement steps? Then pick up after the pump has been re-inserted and go from there. I also take it I need to vent the air when replacing the coolant?
First time working on a BWM and just really want to ensure I do this right. Thanks in advance for your tips.
Hi! Yes, just skip the pump steps but do make sure that you vent the system as you will have to replenish the coolant. Good luck. It's fairly straight forward but takes a bit of time that's all.