Originally Posted by Kruz
I tried both directions...you must have a diff fuse panel layout than what I posted in the pics above. I had fuses in both directions.
I have the same fuse box setup as Kruz.
While installing, I had to come back on the forum and look through all the pages on this thread just to find what I was looking for, Kruz's post.
I'm having the same problem were the mini fuse tap won't go in all the way because of the other fuses. I also have to bend both fuses so the fuse tap goes in all the way. Tried both directions and on each side there are fuses keeping it from going in all the way.