|
Registration & Programming
The cars FRM/CAS/LMA module needs to be reprogrammed VIA NCS EXPERT.
I do not take any liability if you do not know what you are doing.
Here is a VO order for battery sizes.
-B080 80 Ah Battery
-B090 90 Ah Battery
-B110 110 Ah Battery
-A080 80 Ah AGM Battery
-A090 90 Ah AGM Battery
E90 has FRM module but same way of coding it.
Its not necessary to code all car after FA changing but cas and lma (in e60), frm (e90,e70) must be coded.
Changing battery size:
1. Open NCSEXPERT
2. File > Load profile > Select Expertmode > Click OK
3. Press F1 (VIN/ZCS/FA)
4. Press F3 (CS/FA f. EC) > Select E60 > Click OK > Select CAS > Click OK
5. Press F6 (Back)
6. Press F1 (VIN/ZCS/FA)
7. Press F2 (Enter FA) > Select E60 > Click OK
8. A window labeled “Eneter VIN” appears with your vehicles VIN number filled in > Click OK
9. A window labeled Enter FA appears > scroll to find VO for old battery (-B090) > highlight –B090 and press delete on keyboard
10. Enter –A080 is “Attribute” box > Click Add > Click OK
11. Press F6 (Back)
12. Press F4 (Process ECU) > Select CAS > Click OK
13. Press F2 (Change Job) > Select FA_Write > Click OK
14. Press F3 (Execute Job)
15. Verify that the write is complete “Job Ended”
16. Press F1 (Change ECU) > Select FRM > Click OK
17. Verify lines : get coded, FRM, JOBNAME = FA_Write
18. Press F3 (Execute Job)
19. Verify that the write is complete “Job Ended”
20. Press F6 (Back) > Exit NCSEXPERT
|