View Single Post
      03-18-2006, 05:46 PM   #9
larryn
Major General
United_States
143
Rep
8,443
Posts

 
Drives: '97 332ti, '10 E92 M3
Join Date: May 2005
Location: Seattle

iTrader: (2)

Step 14

Remove the three nuts (13mm) that hold the top of the strut held to teh strut tower. Take note of the metal nipple that sticks up next to one of the nuts. It's the alignment nipple, adn you'll use it when re-assembling for alignment. You'll also notice that one of the nuts you have to use an open end wrench on, since it is partially obstructed by the strut tower brace.
Attached Images