View Single Post
      04-05-2008, 03:58 PM   #23
wheelman2925
New Member
 
Drives: 2007 335i SGM 6AT
Join Date: Mar 2008
Location: Jersey City,NJ

Posts: 17
iTrader: (0)

I am currently working on upgrading the amp/speakers in my 07 335i sedan. The schematic was very helpful but I have enhanced it by adding the pin number on the harness( TYCO part #1-828882-1) that goes into the amplifier( located in left rear behind wheel well). The cleanest way to do this would be to get the matching harness to avoid cutting the factory wiring. This may involve some work on my part but it's better than cutting and having to splice the factory wiring. I am still looking for a place that sells the harness.


SUB LEFT
Red/White + pin 8
Brown/Yellow - pin 18

SUB RIGHT
Red/Blue + pin 6
Brown/White- pin 16

FRONT LEFT
Blue/White + pin 9
Blue/Brown pin 19

FRONT RIGHT
Blue/Black + pin 17
Blue/Brown pin 7

REAR LEFT
Yellow/Red + pin 1
Yellow/Brown pin11

REAR RIGHT
Blue/Green + pin 12
Blue/Brown pin 2

CENTER
Black/White + pin 5
Black/Brown pin 15

REAR LEFT WOOFER
Yellow/Red + pin 14
Yellow/Brown pin 4

REAR RIGHT WOOFER
Blue/Green + pin 13
Blue/Brown pin 3

Pin 10 Red/Gray
Pin 20 Brown
wheelman2925 is offline   United_States
0
Reply With Quote