View Single Post
      04-06-2008, 10:07 PM   #63
Mr. 5
Modder Raider
 
Mr. 5's Avatar
 
Drives: M3
Join Date: Apr 2007
Location: Surf City, HB

Posts: 8,624
iTrader: (31)

Garage List
2007 e90 335i  [4.00]
Quote:
Originally Posted by 2007_E93 View Post
Thats what I have been saying...even using a wire and wrap around that area. If you are just missing the part between the black oval and silver rod then wedge/wrap a wire in there. That would solve it. NO more putty knife....LOL

I dont think it would matter if you wrapped the wire to put tension on it from the left or the right side of the rod. As long as there is tension. Fill the gap....C clip or wire!
Come on guys!

I used a putty knife to prove a point!
Of course the next step is to use some sort of clip of some kind.

If I'm smart enough to figure this out, then at least give me some credit to not drive around with a fricken putty knife strapped to my engine.
__________________
e36 M3 Coupe, e36 325i Sedan
e90 335i--SOLD

Best 60-130-------------9.15 Seconds------------------WWW.MR5RACING.COM
Mr. 5 is offline   Scotland
0