You will have to make sure there is a fuse in the cd changer slot
In the fuse board .
and put the fiber into the loop at the most junction.
I had a TCU out so I need to use there Mike unless I can tap
into the OEM one.(TCU died)
I could just put it there but the access isn't good.
Already did the programming for adding the cdc and programming
out the SOS errors . Didn't do VO coding only coded it out/in on
the Kombi , ProRadio looks like it will work that way.
I would like to put somewhere where I can change out the usb drives
easily I am thinking under the dash in the glove area.
Last edited by ctuna; 05-01-2019 at 01:52 PM..
|