Originally Posted by Excellence
You don't need a relay. All you need is a resistor to load the circuit so your drawing 55W.
For HID fogs you will. When I have phase 2 done, I shall post results.
So far still error-less, after driving 30 seconds.
The relay module is included in The MTEC HID Kit, thats the key to error free (http://www.e90post.com/forums/showth...=84882&page=11
). For the conversion using OEM xenon, resistor needed, as you said to load the circuit so your drawing 55W.
Thank you for the great DIY