I've also been looking towards doing a F8X M3/4 Bull Brake kit swap on my E90; but since it's an LCI, there's no conversion bracket made to fit the F8X M3/4 370mm Rear Rotors onto my car, if there is, please share it to me. SLG states that in their E-Series 370mm Brake Swap their bracket isn't compatible with LCI E90's. Is there any possible way to make a full brake swap possible?
I came into this thread wondering if changing from my stock LCI wheel hub (and all other components necessary) to pre-LCI wheel hubs enables me to use SLG's custom rear bracket to fit the 370mm rear rotors.
(Edit)
The only thing I need to swap out to fix my problem is to swap out the stock Spindle Assemblies to the E9X M3 ones.
e9x Rear Spindle Assembly - Left - 33302283541
e9x Rear Spindle Assembly - Right - 33302283542
Note - Tie Rods do not need to be changed.
Last edited by Pierce Jordan; 04-22-2024 at 10:30 PM..
Reason: Found out the answer.
|