View Single Post
      09-23-2006, 03:51 AM   #9
missing two turbos.'s Avatar

Drives: fast around corners.
Join Date: Sep 2005
Location: Curves

iTrader: (12)

Garage List
Originally Posted by Leonardo629
Thanks for the DIY,

I'm still a little confused..

Here's what I received in the plastic bag

3 allen keys
2 bracket (1 L bracket, one housing bracket)
3 screws (1 big one, 2 smaller ones)
3 nuts (2 big ones, 1 smaller one)
1 washer

does that seem right? If the bigger screw is for the L bracket, then what do I use to tight down the housing bracket?

Also...what is that tiny nut for?
1. You got the right stuff.

2. Assuming that the housing bracket is the bracket that supports the main intake piece to the chassis, use the big silver screw that came off in 3rd picture.

3. You don't have to use all the stuff supplied. I have few bolts left over.

hope that helps.

p.s: oh and just to add, the bracket(twisted one) might not fit as perfect as you might like it. just make sure they are screwed down tight, and that'll do the job, unless there is some other way. At least my is holding pretty damn well. I've been a real aggressive driver yesterday and today. guess what caused that.
06 AW E90 330i ZPP/ZSP/Step/Expired Warranty

: Prior Design Front : ACS Rear : ACS Roof : BlackLines : Simota Intake : Carbon Fiber Interior Trim :
: MTEC V3 : 24% Charcoal : V1 Hardwired : Solaris Invisibulbs/LED interior :