Originally Posted by Turkishexpress
Just finished the harness which is the hardest part I figure but only took me half an hour after I unpacked everything and studied the diagram for a while. I will be doing the actual install this weekend. It should be relatively simple however fitting all this wiring under the counsel will be a major bizatch considering I also have the RixEffects gauge power wire running through there.
Thanks again! This is a great DIY.
E90 2007 / Step / Montego Blue / Black Dakota Leather / Premium / Cold Weather
MODS: Exterior: Blacklines, debadged, HO ceramic 35% tint, Hoen yellow fogs, matte black grille, OEM style splitters, Halogen-to-Xenon Interior: Alum pedals, CF wrapped trim, V1 and Nuvi hardwire, M-Tech tri-stitched wheel, SMG M5 shift knob Performance: AluFelgen CSL 19" 8.5 ET33/9.5 ET30 with 5mm rear spacers | GY Eagle F1 Asym 235/265, KW V3, BMW Perf exhaust+intake