Originally Posted by chrisE92
I've been studying this DIY for the past 30 minutes! haha. Seems simple enough.
a l l a n -- So the wires do come with pins on them? How did you connect the wires? I don't have access to a soldering iron. thanks in advance and good job with the DIY!
Yep, the wiring is quite simple.
The bushing/pin contacts I have on this DIY already come with the wires
. All you need to do is insert the contacts into the appropriate housing and join/connect the wires per the harness connection instructions. No soldering required
. These are small wires so twisting them to join them together is more than enough.
This requires a very basic wiring process so you don't need to know much about wiring to do this DIY.
E90 2007 / Step / Montego Blue / Black Dakota Leather / Premium / Cold Weather
MODS: Exterior: Blacklines, debadged, HO ceramic 35% tint, Hoen yellow fogs, matte black grille, OEM style splitters, Halogen-to-Xenon Interior: Alum pedals, CF wrapped trim, V1 and Nuvi hardwire, M-Tech tri-stitched wheel, SMG M5 shift knob Performance: AluFelgen CSL 19" 8.5 ET33/9.5 ET30 with 5mm rear spacers | GY Eagle F1 Asym 235/265, KW V3, BMW Perf exhaust+intake