View Single Post
      07-07-2009, 12:31 PM   #54
this space left intentionally blank
smdandb2's Avatar

Drives: Blue One
Join Date: Jan 2008
Location: BYU

iTrader: (0)

Originally Posted by onesuperboi View Post
Thank you for responding. Would it be safe to safe that with the integration of the CANbus, that the Procede is able to do as many things as a flash without overwriting the DME? If that's the case, then I can certainly understand why you have stuck to the piggyback if you are able to do just as much as flashing the DME.
I can(and DO) monitor the CANBUS with this thing...

That is all Shiv is doing. There is no data being changed on the CANBUS (at least in regards to engine parameters). I have no idea what he is doing on the display. I remember hearing about displaying a numerical boost number there, but never heard if he got it working.

Now, he can monitor what is going on and whatever sensor signals he is interpreting he can change the output to try to adjust based on the CAN information. But it is still 'tricking' the DME. It works, and he makes power. But don't think he is actually changing data in the DME directly. It is a cause and effect type deal.