View Single Post
      01-04-2007, 04:03 AM   #1
///Matt
United States Marine
///Matt's Avatar
United_States
69
Rep
2,749
Posts

 
Drives: 2007 Dodge Ram 1500
Join Date: Jul 2006
Location: Los Angeles

iTrader: (8)

Garage List
2006 330i  [0.00]
Send a message via AIM to ///Matt
FREE PROGRAMMING before accessory activation

HERE. now refer to this to your local service department, and stop paying out the ass for accessory retrofits.

You can thank me later.

///Matt

Quote:
SI B 01 09 06
Warranty November 2006
Warranty

This Service Information bulletin supersedes S.I. B01 09 06 dated October 2006.

designates changes to this revision

SUBJECT
Defect Code for Programming Prior to Accessory Retrofit


MODEL
All


GENERAL INFORMATION
Software update programming is sometimes required as part of an electronic accessory installation. When connecting to Progman to perform "Retrofit Coding", the Status Report will indicate if a software update is required. This software update must be performed before the "Retrofit coding" can be carried out.

A software update to prepare the vehicle for the "Retrofit Coding" of an accessory is covered under the New Vehicle Limited Warranty and must be claimed using defect code 72 60 93 02 00.

Any other Progman programming and recoding of the vehicle software specifically associated with the installation of the accessory should be included in the customer pay installation charge. See Parts Information Bulletin 65 12 04.

For additional information concerning warranty claims for software update programming (Progman), refer to SI B01 03 06.

WARRANTY INFORMATION
The software update and any control module replacement required to prepare the vehicle for the "Retrofit Coding" of the accessory is covered under the BMW New Vehicle Limited Warranty. All control modules must be identified by the Measures Plan or Status Report created by Progman.

The "Retrofit Coding" of the vehicle software specifically associated with the installation of the accessory is included in the customer pay installation charge. See Aftersales Bulletin 65 09 06.

Software update that is performed as a result of an accessory retrofit:

Defect Code
72 60 93 02 00

Refer to the latest KSD version for appropriate labor allowances.

The warranty claim must include in the "Comments" section a clear reason for the programming work for example, "Software update for satellite radio retrofit".

All claims must be supported by copies of the Measures Plan and Final Reports produced at each stage of the programming process. These documents are to be printed and attached to the customers work order.

[ Copyright 2006 BMW of North America, LLC ]