Originally Posted by gIzzE
If your SWS8 is not doing much below 60hz you need to look at your install again, I can guarantee the driver is not sealed properly in the enclosure.
I tried to get it sealed with sealant tape twice and in the end gave up.
Bought some bathroom sealant and used that instead, I then went from it playing to 55hz to play down to 32hz loud, it started to drop off from there but it would play at 28hz at -5db which is pretty impressive.
Can't think of any music that would need lower than that other than some Organ music.
I actually never tested how low my SWS-8s go. It's just that I'm adding a 12" sub in the back so I don't need the SWS-8s hitting below 60hz.