View Single Post
      03-08-2010, 03:50 PM   #144
Castel
Captain
Castel's Avatar
United_States
13
Rep
742
Posts

Drives: BMW 335i Coupe
Join Date: Jul 2008
Location: Portland, OR

iTrader: (6)

Quote:
Originally Posted by LKNGOOD View Post
After reviewing all the DIY for this SSK - looks like no one has replaced the "SHIFTING ARM" - Part #1 25110434218 $254.95 +core that is included in the e90 335i short shifter kit.

Is this part a Pain in the @ss to replace? This may be the one reason I'm just going to get the "M" Perforated Shift Knob and call it a day.

Anyone installed the "true" ssk for the 335i and if so - you was it to install this extra part? (07 SHIFTING ARM 1 25110434218 $254.95 +core).

Thanks,
Mike
Hi Mike,

As I said in my earlier post, I installed the "true" BMW OEM SSK in my 335i INCLUDING the Shift Arm. It was a pain to replace it because there's not much room to work in there. The shift arm lies over the driveshaft so you have to work around it. You also have to bend the heat shield further back in order to be able to take it out. If you have worked on your car before, go for it, at least check it out. Taking the previous shift arm out is the difficult part, putting in the new shift arm in is a lot easier. If I where you I'll jack the car up and take out the plastic panel and check out the assembly for myself. You'll get an idea of how much room you have under the car and how the shift arm is held in place. If you decide to do this or buy the kit and do it yourself send me a PM and I'll help you out/give you a couple of pointers/tips so you know what to look for. Another forum member, dtp3347, gave me some pointers and what to look for and this helped me out immensely.

If you are unable to do it after trying it out have an independent shop do it.

Good luck!