And some more . . . . .
Note BMW earth point on RHS rear wheel arch where I have taken the earth for the amp from.
Also note amp turned upside down and velcro mounted on either end. I am about to put the amp
into the bottom of the CD changer BMW meccano assembly on the LHS of the boot. The area of the
"meccano set" at the bottom is not big enough for the amp to allow it to sit up and a gap to be under
the fan, so I made a base which you can see out of some plastic I had lying around. I then fixed the
amp to the plastic with velcro and the plastic to the bottom of the maccano set. This allows the amp to
sit up above the plastic and have a gap to allow air to get into the fan.
This is a little amp for the power, so cooling needs to be a consideration, especially allowing the fan to do
Last edited by sniffer; 03-21-2010 at 04:15 PM.