View Single Post
      02-16-2011, 12:03 AM   #51
BimmerPost Supporting Vendor

Drives: 2007 335i, 2015 M3
Join Date: Dec 2008

iTrader: (89)

Originally Posted by frank35 View Post
I am interested in dp catless, between active 3 " and ar design 3 ". They said to me that really the ar design is equal to the CP-e, and ends in 2.5 ". Is it true?
There are differences between active and the ar design?
I can't send you a PM for some reason so shoot me an email so we can discuss.

Email; Mike @ n54tuning . com

Originally Posted by Imperator View Post
All of these bolt-on catless downpipes taper from 3" (at the turbine flange) to 2.5" at the secondary pipes.

The most significant differences among these pipes are construction.

CP-E downpipes use cast flanges that neck down to 2.5" at the first bend off the turbos. I like that for its durability over heat cycles from a daily-driven car.

The ar Design pipes are quality mandrel-bent, welded pipes that neck down to 2.5" at the secondary pipe flange. Seemingly hundreds have been sold without issue. Ceramic coating is optional.

These AA pipes appear to be constructed with quality that rivals ar. In addition, they include mounting brackets that help to suspend the front portion of the exhaust system and control lateral movement as the engine flexes under load. The price in this group buy is hard to ignore-- these AA pipes look to be an incredible value.
Thanks for your input


Click ABOVE to be taken to our CRAZY Black Friday 2015 SALES!
We ill not be Undersold - Lowest Price Guarantee in Affect!