View Single Post
      03-25-2011, 08:34 PM   #12
New Member
mruiz929's Avatar
Drives: 335I
Join Date: Feb 2011
Location: OC

Posts: 7
iTrader: (0)

N54Bolt Torque specs

Very informative and easy to follow. Wanted to see if you guys knew the torque setting for the bolts that secure the oil thermostat housing to the oil filter housing? I am getting a leak in between there and have bought the seal it needs. Every morning when i start it up i get seapage and goes away after a while, but is always wet when i clean it off. I bought the seal that was $18 and the 2 o rings that secure the engine oil cooler lines to the oil thermostat housing (looks like they are a little wet too). Does anyone know the torque for the 3 bolts holding the oil thermostat housing to oil filter housing, the bolt holding the 2 oil cooler lines to the oil thermostat housing and if you guys recommend coating the seal with anything besides oil when installing? thanks and i hope someone can give me some direction. My vehicle is a late 07 335 and has an engine oil cooler.
mruiz929 is offline  
Reply With Quote