NCS-Expert - COAPI-1000 Error - After using Dension programmer to enable CD Changer
Two days ago I coded several options (Digital Speed, Corner Delete, etc) on my 2006 E90 330i.
However, after installing a Dension Gateway 500 and using their programmer (OBD-II) to enable the cd changer controls, I now get a COAPI-1000 error when attempting to back up from choosing chassis and 'CAS'.
I put the dension in service mode and used the programmer to remove the changes, but I still get a COAPI-1000 error. So I'm stuck.
Now that I'm back inside I can't find a log file which has the details.
I'm using NCS Exper 3.1.0, COAPI 3.5.1B (so daten can't be an issue since it worked before?) and I've tried clearing the man file. I've also tried a entirely new profile w/o any luck.
BMW Performance: Steering Wheel | Strut Brace | Exhaust | Intake
Mods: CDV Delete | Lumbar Support 'Retrofit' | Power Folding Mirrors 'Retrofit' | 45% Huper Optik Ceramic Tint | Blacklines | BMW Short Shift Kit | BMW Aluminum Pedals
Coding: Digital Speed (Correction Off) | Door Gong Off | Corner Delete | Enable Electrochromatic Mirrors | Close Windows w Fob | Eject Key Fob
Last edited by HomeBrew; 04-17-2011 at 03:59 PM.