View Single Post
      04-24-2011, 03:43 PM   #9
DESI4life10's Avatar

Drives: Coding:
Join Date: Oct 2008
Location: West of Toronto, Canada

iTrader: (18)

I sent you a pm with more details.

You have 2 choices, you can do the mod outside the headlight or inside the headlight (I did it inside for a more oem look (tapping the black wire for lowbeam with the brown wire from the highbeam). While your at it, you need to also tap the wire if you want the bi-xenon feature (details can be found in that same link).

I should have posted the steps as a 2 part process. The coding eliminates the need to use hid kits with cancellers etc and use all OEM parts.

Once you have the low beams tapped to the ground, you will be good to go. You can do the tapping while the headlight is installed on the car as well.

Since you have done the coding, you will most likely get an error when you plug the halogen lights in (I don't recommend it).

As for your coding process, it looks right. Send me the FRM .man file.