Amp & MS8 Fitting
As much as I wanted to do a completely stealth install this just wasn’t on the cards with the Amp I chose. I could have possibly mounted the MS8 underneath the boot floor but this would have been tight and wiring would have been an issue. After much deliberation I decided to mount both to the back of the rear seat.
I first cut two exact templates of the amp and the MS8 out of MDF and fixed these securely to the seat back taking care to use screws short enough not to protrude through the seat itself. Once these boards were secure I mounted the amp and MS8 to them giving a solid, secure fit. As for all the remaining wiring I made this as neat and as hidden as possible.