I typically try the sheeting, then a quick jont up/back the driveway to motor off some of the excess. But with a typical Saturday morning often containing the E90, truck AND teh motorcycle, I'd need quite a few towels, where teh one cham does the whole lot. I almost always start with the E90, and am pretty good about the first thing in my bucket of suds is the cham.
But with a good wash/sheet, shouldn't the surface be pretty much free of contaminants to begin with? I've gotten pretty picky/picking about checking my (insert implement name here) for debris before putting it to paint. I have a separate black sock that is the only thing to touch black brakedust covered wheels, and the bit of paint in the wheel well.
|