Quote:
Originally Posted by daveishi
Hey guys, sorry if this is a bit OT but i'm new to tracking (first time last Sat and loved it). But I saw a few posts about running a 255 square setup, any updates or feedback on rubbing on stock e92?
I'm in a 335is so it's got a "sport tuned suspension" of which I am still not exactly sure what it means, I assume perhaps a stiffer/high spring rate but same dual gas struts/shocks as 335i?
Anyway I want to run 255/40ZR17 RS-3's on a 9 or 9.5 in wheel. I don't want to do any body modifications and may consider coilovers or springs in the future but for now will run stock ride height. Currently have 19" 313M's, 9J 255 in rear so I know those will clear but I'm concerned about rubbing in the front since stock are 19" 8J 225.
Any input appreciated! And if this is OT I apologize, I'll remove it. Thanks
|
Create new post in tracking and/or wheels and tires section.
BTW, you should have no problem with new wheels and camber plates. I and many others run the same setup you want to.