Posted here along with the most current maps:
http://vishnutuningforum.com/viewtopic.php?f=2&t=21
No changes to the maps or datalog set up files. All I did was replace the previous firmware version with the firmware. So those already running the most up to date goodies, need only update their firmware.
Compared to the privately released Firmware #19 (in-dash boost gauge) that I emailed out to a few hundred people the other day, this new firmware is for public consumption. And it has a few improvements.
Changes:
-Fuel level gauge now works in valet mode
-Ability to toggle between fuel gauge mode and boost gauge mode by double-clicking the Hazard button. Note that the engine must be running to switch modes. And that this will only work when in a non-valet map (map1 or map2).
-The display mode selection is also pesistent upon power off/on. So if you select boost display mode. It will remain selected after you shut off/on your car. Same goes for standard fuel level display.
-When starting the car in fuel display mode, the needle first move (momentarily) to display fuel level. Just for a second to let you know
As always, the miles-until-refill and low fuel level indicators/alarms are still functional, regardless of what display mode you are in.
Little demo: