I put my catless downpipes on myself last week at my friends house last week. He has a lift which came in VERY handy.
What we discovered (probably already been mentioned somewhere on this forum) is that the standard lifters on his lift won't fit my cars OEM jack points. As another issue, the car is too low for this arms to fit under the jack points so we jacked up the rear of the car enough for the front arms to fit under the front jackpoints and then removed the rear wheels. We then put the rear lift arms under the spring mounting cups. Figured that if the springs which take a beating from the cars weight were supported by this point then it would suffice for a lift point.
After lifting the entire car about 2 inches off the ground we stopped and tried to rock the car back and forth to see if it was stable, no movement at all. Lifted all the way up and commenced a very annoying and confined install.
I have more photos that I'll add later, but i'm not on my computer right now.
