[C_Clancy26]

Alright, I wanna start first and foremost with some history on my car, as it’s important. Long story short, I picked up an individual spec 2008 E93 335i for just for $10,700 AUD back in October. When I bought it, it had a half light and was in limp mode, but for the price and spec I could not say no. It had some sort of knock, and I brought my friends who works at Melbourne BMW to check it with me (an old colleague of mine, used to be an apprentice there myself) and he was confident it was wastegate rattle (he said when the gates are fully open 24/7 in limp mode with bad rattle they sound just like that, and that they’re very often confused with rod knock). Well, turns out it was rod knock, although I had a suspicion it might’ve been before I bought the car so I was prepared to fix it. We removed the engine ourselves, but then I got a master tech friend of mine to install the new one, as I didn’t wanna terminally fuck something and I didn’t have the time to put it back in myself. We got an engine for very cheap from a friend of said master tech, the master tech walnut blasted it, put new oil pan, oil filter housing and valve cover gaskets on, and chucked it in the car. It ran great. Then it started bogging. Keep in mind, i was told before I bought the car that it was tuned, didn’t say anything about the tune, just said the previous owner said it was tuned. So it starts bogging, and then gives me limp mode. I load MHD, and it gives me code 29F2, the first time I had seen it at this point. I initially thought that it was the HPFP, but my girlfriend pointed out that this happened pretty much straight after I put 95 in the car for the first time (I had been filling up with 98 before this) so she said it might be something to do with the tune being 98 only and the computer was acting up. So I emptied the tank as much as possible, filled up with fresh 98, then cleared the code, and it didn’t come back until a day or two later. I had been doing pulls in that day or two and there was no bogging, then all of a sudden it comes back on, and no matter what, whenever I clear the codes, as soon as I hit even 0.1 psi of boost it comes back on. So I figure it must be the HPFP. I bought a non genuine one, thinking that if the hpfp wasn’t the problem I’d rather spend $300 finding that out rather than $1000, I put it in, and the car ran great! Then after doing some work on the cooling system a couple days ago, (radiator exploded on me :/) I decided to take it for its first proper drive on a nice road (keep in mind I have owned this car for 3 months and this is the first fun drive I’m doing) it ran great all the way around the road, I had fun, and then on my way back home I pulled over to call my bmw friend and tell him how good the cars running, and approximately 0.03 microseconds later, boom. Fans fully on, engine running weird, and limp mode. And guess what code it was ? 29F2. This was the first I’d seen of this code since replacing the HPFP and it really scared me. So I cleared the code, babied it back home, and left it to sit. I drive it to work this morning very gently most of the way, and it ran fine, so I gave it a couple pulls, and once again it ran fine, no code. So what the hells going on? I’m losing my mind trying to research and figure out what’s going on? Also there are some fuel related shadow codes that have been haunting me for a bit. I also need to find a way to figure out whether or not my cars actually tuned, and if so what the tune is. I’m losing my mind, someone please help.
Ps sorry for the rant, kinda wanted to share the cars story aswell. I’ve attached pics of the car and code history. Cheers!