|
dude its your waterpump...do not drive the car or you will blow something in the engine. happened to me and i turned it off immediately.
you could actually check your waterpump by turning it on for the bleeding process. you have to turn the car to the on position without starting your car and put your heater on the highest temperature set at low speed fan and hold the accelerator down for 10 seconds and it should turn on.
if you pop your hood you should be able to hear intermittent sounds of the waterpump turning on and off. if you cant the obviously your waterpump has failed.
what you could do though is stop your car and let it sit for a while so the temp goes all the way down and if you are like less than a few minutes away from the dealership just drive it there but only if its a few minutes away.
__________________
Space Gray l 6MT l OSG LSD w/ VAC Race Diff Cover l Cobb e30 l Morr vs8.2 l UUC SSK w/ DSSR l VSRF Catless Dps l RPI Intercooler l CDV Removed l HID AE 8000k l ETS Catback l AST 5200 w/ Vorshlag Camber Plates l ER Dual Oil Coolers l Rear Camber and Toe Arms l K&N Drop In l Solid Tranny/Diff/Subframe Bushings l Bridgestone RE-11
|