UPDATE
After fighting with different NCS Expert versions and Datum version, I could communicate and code CAS, NFRM, KOMBI and CIC. (iDrive)
Everything working now.
For others like me:
1) my retrofit was from MULF2 to MULF2-HIGH. (Add USB $6FL)
2) adapt all physical connectors with a knive. (Yes hard to believe)
3) Add FA/VO $644 $6FL $620 to CAS and NFRM
4) Code CIC variables for USB and BT
5) SG_RESET MULF2 and CIC
6) If problem with Voice commands remove language tag. $85x or replace with 853 english and SG_RESET
In my particular case I had the BT antenna and mic, so no glovebox connector issue, and i've just left the USB cable and USB drive in trunk.
Code rules!
Quote:
Originally Posted by palvarez
Hey guys,for those of you who did the MULF2_HI retrofit, any ideas?
Before:
MULF2/iDrive
Bluetooth working.
Voice commands NOT Working. (somethin wrong with the mic???? it works with BT)
USB N/A
$644 and $620 from factory.
Datecode #0610
After:
MULF2_HIGH_SYS/iDrive
Bluetooth NOT Wotking.
Voice Comomands NOT Working.
USB NOT working.
$644 and $620 from factory.
Added $6FL + Write FA.
Should i try with a different Date code?
Should i do SG Codieren? May be some variable there Not_Aktive?
Which ones should be active for VC/Bluetooth/USB?
Is it maybe a different VIN in the MULf2-HI?
Thanks!!
|