Quote:
Originally Posted by ntpcrew13
1,2 are one channel and 3,4 are the other channel. you should get a pac trunk-loc if you are gonna do this setup. if you use a pac trunk-loc:
wire 1- (red/blue) will go with the gray wire from pac.
wire 2- (brown/white) will go with the gray/black wire from pac.
those are the right sub wires.
wire 3- (red/white) will go with the white wire from pac.
wire 4- (brown/yellow) will go with the white/black from pac.
those are the left sub wires.
green wire from pac should go on wire 4 (brown/yellow).
ground wire form pac goes to ground on car or ground it to the amp(i grounded to the amp ground).
red wire from pac goes to +12 on amp.
blue wire from pac goes to remote on amp.
good luck.
if you need more help you can follow my link.
|
Thank you!!! You're the best!