Eclipse 2 channel amp (Model XA2000 1&2 channel Class D amp) $100
Quote:
2-Channel Class D ICEpower Technology Amplifier with controls for level, crossover, low frequency boost and high/low pass filter adjustments.
RMS Power Output
4 ohms: 100 watts x 2 chan.
2 ohms: 150 watts x 2 chan.
Bridged, 4 ohms: 300 watts x 1 chan.
Output terminals allow multiple in-line unit installations.
ICEpower technology—full range Class D power
FET power supply
Variable 30-500 Hz 18 dB high-pass crossover
Variable 50-500 Hz 18 dB low-pass crossover
Variable 0-8 dB Bass Boost
Fully variable Subsonic Filter from 32-64 Hz
Illuminated Eclipse logo power indicator
Clipping indicator LED
Dimensions: 10-3/16"D x 9-13/16"W x 2-5/16"H
|
Perfect to channel under seat woofers. (currently tuned perfectly to do so)
Or Use it to power front component speakers. Either way this is an excellent amp.
Pick up in Long Island. Still have original box if wanted.
Alpine MRD M1005 Monoblock Amp $200
1000 RMS. Disturb your neighbors in clean style bass.
Quote:
Bass Engine
Crossover Type: Digital 24dB/Octave Slope
Selectable Low Pass Crossover Frequency: 30Hz - 200Hz
Subsonic Filter Range: 15Hz - 50Hz (5Hz Steps)/OFF
Subwoofer Level Adjustment Range: -15dB to 0dB
Subwoofer Phase Control : 0° Normal/180° Reverse
24dB/octave Slope
General-Amplifiers:
Frequency Response : 10Hz-500Hz
Mono Speaker Impedance: 4 or 2 ohms
Input Impedance: 100k ohm
Input Sensitivity: 0.1V to 8.0V
Signal to Noise: 90dBA
Heat Sink w/Cover (W x H x D): 13" x 2-5/16" x 8-11/16"
RMS Power at 12V, 20Hz-200Hz:
Per channel into 2 ohms : 700W x 1
Per channel into 4 ohms : 500W x 1
RMS Power at 14.4V, 20Hz-200Hz:
Per channel into 2 ohms : 1000W x 1
|