Quote:
Originally Posted by Technic
Try:
- amp gains at minimum
- skip input setup
- no sub
- front 2-way (30Hz subsonic at 24dB, 120Hz Hi/Lo at 6dB)
- rear 1-way (100Hz at 24dB)
- center 1-way (150Hz at 24dB)
- calibration volume -45dB
Set MS-8 volume after calibration to -6dB. Adjust amp gains to desired level, you might find that the woofers are low on impact. Adjust the 31-band EQ to taste. Use your OEM volume normally.
Play around with the front Hi/Lo point/slope, calibration volume and amp gains for different results.
|
believe it or not
setting all crossovers to 12db (except the subsonic, that was set to 6db)
made a big difference in the sound
rear and center i had them set to what you suggested
any lower for center and it starts to buzz on the bass heavy parts
and the rears should be 100hz based on JBLs recommendations