Quote:
Originally Posted by scubasteve2365
An amplifier that puts out X watts @ 4-ohm mono will put out 1/2 the power with less distortion in 2 separate channels @ 2 ohms for each channel. This means that you can run the SWS's in stereo and receive the same amount of power to each sub. This is why the 2-ohm versions of the subs were made and are probably the more purchased version.
example:
300 watts x 1 channel @ 4-ohm load
150 watts x 2 channel @ 2-ohm load
Both of those situations will power the subs equally.
|
And as in my JL XD600/6
CH1 & 2 (200W total) -> Front
CH3 & 4 (200W total) -> Rear
Ch5 & 6 (200W total) -> Subs
All channels are 100W @ 2ohm & 75W @ 4ohm