View Single Post
      11-09-2012, 09:46 AM   #61
jcamber
Private
United_States
2
Rep
55
Posts

Drives: 2011 535i
Join Date: Mar 2009
Location: Fort Worth, TX

iTrader: (0)

Thanks to all of you that take the time to post these DIYs. I was able to replace my regulator in about 30-35 minutes and there's no way I could have done it without you!

Quick couple questions. After I finished, the window would only go up or down in little "steps" of about 3 inches. Then I did the reset (hold the switch down for 4 seconds after it was all the way up) and then it would go down completely if I held the switch up or down. What doesn't seem to work though is the "auto-up" feature, where I just hit the switch up once and to the top position and the window goes up completely without me having to hold the switch up. Any ideas what I still need to do? I tried to do another reset on the down position but that didn't fix it.

Last, I ended up with an "extra" part. I don't know where it came from. When I took the old regulator out I noticed it was at the bottom of the door on the inside. Any ideas what this is?

""
""
Appreciate 0