Quote:
Originally Posted by AW325xi
Hi Ron,
I have a template from Brembo, but they don't have the 6-piston listed for the 355mm rotors (only the 380mm).
That being said, it seems that the "A" dimension from Brembo's Caliper Clearance Guide is the same for 4 or 6 piston at 24mm. If that is correct, I have plenty of room on these rims - about 1" more than is required. The "B" dimension I was using is 122mm from the Brembo Caliper Clearance Guide.
I used the "C" radius of 200mm from the 4-piston 355mm Caliper Clearance Guide, which is 7.875". My clearance is 8.25" or a difference of 3/8".
Would you confirm the dimensions I'm using are correct?
Thanks,
Rob
|
Hey Rob,
I send you the exact template you need, earlier today, just give me a call or email me back if you need any more help with it.
Hopefully you can get some new Brembo's