Quote:
Originally Posted by Wei718
They don't reset after a restart. It'll just do a self check and if you installed the front sensor arm wrong it may point downwards all the time. I made that mistake by clipping on the sensor clamp incorrectly, my headlights were aiming to the ground and barely moves when doing the self check and after my friend helped me correctly installed the arm everything was fine. Didn't had to adjust the aim or whatever.
Just a tip! Before removing the front sensor while working on your suspension I suggest snapping a picture of the orientation of how the sensor is clamped on the lower control arm
|
Thanks for the heads up! I'm currently looking at the KW V2's. Heard nothing but good about those!