Quote:
Originally Posted by woodpecka
Exact.
If you already have the heat seats, you have to jump the power on the other pins.
If you don't have any electrical component, you have to bring the power from the junction box to the seat connectors / pins.
The only way your new seats could move is if you had electrical seats before.
Concerning the airbag light, you need a cable with INPA to remove the error. If you read the thread, you will see that I had the same issue.
|
My current seats have electrics to tilt and up/down, the M-Sport seats do not have heat as far as i can tell from the pins as pin 9 is missing, please find attached some diagrams a drew up as a comparison between M-sport and standard seat (Passengers side). Marked in red are the pins
As you can see pin- 2,3,7,8 are on the M-Sport seats and not my standard setup.