Quote:
Originally Posted by Alvine90
that's not how it's done. you need to modify the nettodat file in the work folder.
|
Quote:
Originally Posted by Alvine90
because our frm modules don't have the DOPPELBLINKIMPULS_WARNBLK line. It's what grant told me to do.
|
Quote:
Originally Posted by Grant@DetailAddict
On an 06 with FRM1 its a non-standard value. Meaning you have to change specific bytes using NETTODAT.
For instance on a 5 series, there is no standard line so you would read the LMA (5 series equivalent of the FRM) with NCS and open NETTODAT.TRC
Then in that file you look for a specific sequence, the 5-series being:
B 00340500,0010,95,71,00,83,0A,00,51,00,14,53,01,15, 59,04,00,00
You change the "95" byte to 97 and save it as NETTODAT.MAN
Then in NCS, select basic functions/coapiCodeSgByNettoDATA Type "NETTODAT.MAN" in the input box, and finish.
|
Do you know what line to change? The E90 doesn't have 95 and 97, if I'm looking at what I think I'm supposed to look at.