IFH-0003 Datatransmission to Interface Disturbed
Bought this cable:
http://cgi.ebay.com/ws/eBayISAPI.dll...d=822819472001
2009 335i Coupe
Windows 7 Starter 32bit on Lenovo Netbook
Ediabas 6.4.7
INPA 5.0
COM Port auto installs as 3, changed to COM 1
Latency set to 1 as recommended
FIFO buffers set to 8 in registry
Uninstalled Windows COM port drivers that were auto installed when cable plugged in
Installed latest drivers from FTDI website v2.08.14 (plug has a FTDI labelled chip inside)
Ediabas set to correct OBD interface
INPALOAD appears to be up and running. Two black dots (battery and ignition)
Load e90 [F9]
Goto Karosserie > airbag then get IFH-0003 error
Cable originally had pins 7 and 8 soldered together. I removed the solder bridge and even physically removed pin 8. Still getting the IFH-0003 error.
Any suggesstions?